GRYFN GOBI payload offers connection to users over WiFi or Ethernet connection. GOBI can be powered via aircraft power or using the power delivery (PD) USB-C port on the back of the chassis.
When connected to GRYFN Gobi, the WebUI can be accessed in a browser at 10.0.65.50
WiFi
STEP
ACTION
1
Power GRYFN Gobi
2
Connect device to GOBI#### WiFi Host
4
Visit GOBI WebUI @ 10.0.65.50 in a web browser
Ethernet
STEP
ACTION
1
Power GRYFN Gobi
2
Connect device to GOBI via RJ45-ix Industrial acc. Ethernet cable
2
Visit GOBI WebUI @ 10.0.65.50 in a web browser
GOBI Powered in Office and Connected via Ethernet
with Fan Pointed at Exhaust, Standing on LiDAR
Setting a Static IP Address
To connect to GOBI over ethernet, a static IP address will need to be assigned to the desired port used for connection (native Ethernet port, or USB-C/A if using an adapter). Some organizations may require IT privileges to edit a port's IP address.
To set a static IP address for the desired port in Windows:
STEP
ACTION
1
Open Network Status (Network and Internet Settings)
2
Change Adapter Options
3
Select the correct Ethernet connection -> Right Click -> Properties
4
Internet Protocol Version 4 (TCP/IPv4) -> Properties
